Guangzhou XinFeng Engineering Machinery Co., Ltd.
Excavator accessories expert, tailor-made for you, innovation, quality, reliability - our commitment.
Add to Cart
Product Descriptio
H1 Danfoss Motor Series
H1 series hydrostatic motors and pumps can be used with or without other manufacturers' equipment. The H1 series variable displacement engines are crankshaft-designed and feature spherical pistons.
The H1B160 motors are designed to operate equipment in a closed-loop system. The H1 series motors have a maximum/minimum displacement ratio of up to 5:1 and high output speed. The advanced zero displacement function combined with the high-performance 32 degree maximum tilt angle makes it easy to increase machine productivity.
Engine displacement 160 cm3.
The nominal and maximum speeds of the H1B160 motors depend on the displacement.
The H1-B-160 series hydraulic motors start at maximum displacement. This ensures maximum starting torque at high acceleration.
Danfoss H1 series motors are used in HTS (hydrostatic transmission) on machines such as bulldozers, excavators, pipelayers, compact loaders, snows, as well as traction winch drives and drilling rigs.
Danfoss H1 series motors are
The H1 product line is a modern series of motors based on the successfully proven 51 series motors
Six sizes of variable displacement engines
Efficient axial piston design
Proven reliability and performance
Compact and lightweight
| REXROTH | MESSORI | TADANO | and other | |
| REXROTH-UCHIDA | HITACHI | JIC | PARKER | |
| SAUER DANFOSS | KOMATSU | KOBELCO/KATO | YUKEN | |
| EATON-VICKERS | LINDE | JEIL | HARVESTER | |
| KAWASAKI | KYB | TEIJIN | Daikin | |
| KAWASAKI SWING MOTOR | NACHI | TOKIWA | ITALY SAM | |
| LIEBHERR | TOSHIBA | HAWE | OILGEAR |
Maintainance
Danfoss hydraulic pump is a common hydraulic power equipment, and regular maintenance is essential for its performance and life. Here are some Danfoss hydraulic pump maintenance recommendations:
Cleaning: Keep the outside of the hydraulic pump clean and regularly remove dust, oil and other impurities from the surface of the pump body. Use a clean cloth or air pressure spray gun to clean to ensure the heat dissipation performance and normal operation of the pump.
Lubriion: Check and replace the lubriing oil regularly according to the specifiions and requirements of the Danfoss hydraulic pump. Make sure to use the appropriate lubriing oil and lubrie according to the manufacturer's recommendations. At the same time, check the oil level and oil quality of the lubriion system to ensure the normal operation of the lubriion system.
Filter: Check and replace the filter of the hydraulic pump regularly. The function of the filter is to prevent impurities and particulate matter from entering the pump, keep the fluid clean and the pump normal operation. According to the usage, replace the filter according to the manufacturer's recommendations.
Seal: Check the seals of the hydraulic pump, including O-rings, gaskets, etc. Make sure the seals are intact to avoid leakage and performance degradation. If necessary, replace worn or aged seals in time.
Temperature control: Pay attention to the operating temperature of the hydraulic pump. Excessive temperature may cause oxidation of the hydraulic oil and damage to the pump. Ensure that the cooling system of the hydraulic system is working properly to control the operating temperature of the pump.
Regular inspection: Check the working condition and performance of the hydraulic pump regularly. Pay attention to abnormal conditions such as noise, vibration and temperature changes of the pump. If abnormalities are found, perform fault diagnosis and repair in time.
Regular maintenance: Perform major maintenance and overhaul work regularly in accordance with the maintenance manual of the Danfoss hydraulic pump and the manufacturer's recommendations. This may include replacing worn parts, calibrating the performance of the pump, cleaning the oil system, etc.
About Xinfeng Machinery (XF) parts:
Advantages
Warehouse Display
Packaging and Delivery
FAQ
1. How to quickly and accurately buy products what lneeded?
A: Provide the original parts number to us to check.
2. How long have you been in the excavator
A: We are engaged in excavator parts since 1998
3. lfI don't know the part number,what shouldI do?
A: Please send us size and pictures of old products.
4. What is the warranty of the products?
A: The warranty is 6/12 Months based on the specific product.
5. How long is your delivery time?
A: The normal delivery time is 3-5 days for stock sproductsafter getting payment. lf not in stock, we will inform you thetime requlred.
6. Which shipping term you can supply?
7. What is your MOQ?
A: Small order and sample order are acceptable
8. Do you have any After-Sales service?
A: Yes!Our