Guangzhou XinFeng Engineering Machinery Co., Ltd.
Excavator accessories expert, tailor-made for you, innovation, quality, reliability - our commitment.
Add to Cart
Product Descriptio
| Pos. | Part No | Qty | Parts name | Comments |
| 1 | 180-6213 | [1] | RING-RETAINING | |
| 2 | 6E-4003 | [2] | BEARING | |
| 3 | 173-0637 | [1] | HOUSING-PUMP | |
| 4 | 120-5726 Y | [1] | ROTATING GP-PUMP | |
| 5 | 3E-6769 | [4] | SEAL-O-RING | |
| 6 | 095-9805 M | [4] | BOLT-SOCKET HEAD (M14X2X40-MM) | |
| 7 | 1P-6872 | [1] | CUP-BEARING | |
| 8 | 8C-7110 | [1] | CONE-BEARING | |
| 9 | 103-5520 | [1] | CARRIER-PIN | |
| 10 | 6E-4000 | [1] | SPACER (25.5X35X3-MM THK) | |
| 11 | 3E-6770 | [1] | SEAL-O-RING | |
| 12 | 6E-6175 | [1] | CYLINDER | |
| 13 | 6E-6176 | [1] | SPRING | |
| 14 | 6E-6174 | [1] | PLUNGER | |
| 15 | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 16 | 2M-9780 | [1] | SEAL-O-RING | |
| 17 | 162-1604 | [1] | SHAFT-DRIVE | |
| 18 | 6V-2323 | [1] | CONE-BEARING | |
| 19 | 3B-5790 | [1] | CUP-BEARING | |
| 20 | 6E-4004 | [2] | SEAL-SHAFT | |
| 21 | 173-0639 | [1] | SWASHPLATE AS | |
| 22 | 120-5727 | [1] | PISTON-CONTROL | |
| 23 | 120-5729 | [1] | GUIDE-PISTON | |
| 24 | 136-8423 | [1] | PLUG-BREAK OFF | |
| 25 | 083-4419 | [1] | PIN | |
| 26 | 173-0641 | [1] | PLUG-FILTER | |
| 27 | 173-0638 | [1] | HEAD-PUMP | |
| 28 | 215-9219 | [1] | ADAPTER AS | |
| 29 | 3J-7352 | [2] | CONNECTOR | |
| 30 | 3J-7354 | [3] | SEAL-O-RING | |
| 31 | 193-8648 | [1] | TUBE AS | |
| 32 | 103-5519 Y | [1] | VALVE GP-PUMP CONTROL (POWER COMPENSATOR) | |
| 33 | 6V-5683 M | [1] | BOLT (M6X1X16-MM) | |
| 34 | 3C-8388 | [1] | PIN-ROLL | |
| 35 | 213-9804 Y | [1] | VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION |
Maintainance
The maintenance of the hydraulic pump of the Carter loader is very important to extend its service life and ensure its normal operation. Here are some maintenance suggestions for the hydraulic pump of the Carter loader:
Regularly replace the hydraulic oil: According to the operating manual or recommendations of the Carter loader, regular replacement of the hydraulic oil is an important step to keep the hydraulic pump in normal operation. The hydraulic oil should be selected according to the specifications and grades specified by the manufacturer, and replaced at the specified time intervals.
Check the hydraulic oil filter: The function of the hydraulic oil filter is to filter impurities and contaminants in the oil and protect the hydraulic pump and other hydraulic system components. Check the status of the hydraulic oil filter regularly and replace or clean it as needed.
Pay attention to the hydraulic oil temperature: Excessive hydraulic oil temperature can cause damage to the hydraulic pump. Make sure that the hydraulic oil temperature is within the appropriate range to avoid overheating of the hydraulic oil due to long-term operation or overload operation. If the hydraulic oil temperature is too high, stop using it in time and check the cause.
Check the seals and pipe connections: Regularly check whether the seals and pipe connections of the hydraulic pump are tight and ensure that there are no leaks. Leakage will cause the performance of the hydraulic pump to deteriorate and may cause other failures.
Clean the hydraulic pump housing regularly: Keeping the hydraulic pump housing clean can prevent dust and dirt from entering the hydraulic pump and affecting its normal operation. Use detergent and soft cloth to clean the hydraulic pump housing regularly.
Please note that the above suggestions are for reference only. The specific maintenance steps and cycles may vary depending on the equipment model and usage environment. It is recommended that you refer to the operating manual of the Carter loader or consult a professional technician for accurate maintenance instructions.
About Xinfeng Machinery (XF) parts:
Advantages
Warehouse Display
Packaging and Delivery
FAQ
1. How to quickly and accurately buy products what lneeded?
A: Provide the original parts number to us to check.
2. How long have you been in the excavator
A: We are engaged in excavator parts since 1998
3. lfI don't know the part number,what shouldI do?
A: Please send us size and pictures of old products.
4. What is the warranty of the products?
A: The warranty is 6/12 Months based on the specific product.
5. How long is your delivery time?
A: The normal delivery time is 3-5 days for stock sproductsafter getting payment. lf not in stock, we will inform you thetime requlred.
6. Which shipping term you can supply?
7. What is your MOQ?
A: Small order and sample order are acceptable
8. Do you have any After-Sales service?
A: Yes!Our